Lockheed C-130 Cargo Aircraft
| Material & Specification | Orcon Item No. | Dimensions | Application |
|---|---|---|---|
| Insulation Batting:
BETWEEN FRAMES STM 26-702, Style C,Type2 Grade AA, Class 2 (G26.2621) Superceeds LAC26-2006 |
57033-12
57000 57010 57007 |
2”x 4”x12’
2”x 7”x25’ 2”x11”x25’ 2”x21”x25’ |
Between Frame Batts (covered batting with hook tape fastener) Process Bulletin G-509 |
| Insulation Blankets:
SIDEWALLS and CROWN STM 26-703, Type 2, Classes 1 & 2, Color Green #34424 (G26.2661) Superceeds LAC26-2007 |
57113
57103 57203 57211 (other colors and thicknesses available) |
1”x48”x50’
1”x36”x50’ 2”x36”x50’ 2”x48”x25’ |
Sidewall and Crown Over frame blanket material used on interior sidewalls and crown areas in cargo compartment, under flight deck. |
| Insulation Blanket:
2 sided, High Speed STM26-703, Green #34424 (G26.2670) |
57121 57221
(other colors and thicknesses available) |
1”x48”x50’
2”x48”x25’ |
Sidewall and Crown Over frame Blanket, Heavy Duty backing – High Speed version |
| Insulation Blanket:
Quilted AMS-I-7171 (MIL-I-7171D) Type 1, Class 2, StyleA NSN5640-00-269-1049 Green #34424 (G26.2671) |
63001
(other colors and thicknesses available) |
¼”x36”x50YD | Quilted Blanket Insulation, diamond stitched, used in high wear areas in lieu of STM26-703 Over frame Blankets (1/4” thick) |
| Insulation Blanket:
Quilted AMS-I-7171 (MIL-I-7171D) Type 1, Class 2, StyleA NSN5640-00-269-1048 Green #34424 (G26.2671) |
63002
(other colors and thicknesses available) |
½”x36”x50YD | Quilted Blanket Insulation, diamond stitched, used in high wear areas in lieu of STM26-703 Over frame Blankets (1/2” thick) |
| Insulation Blanket:
Process specification LAC G597 C1B with LAC26-871 #34424 Green Trim Fabric bonded one side |
56503
(other colors and thicknesses available) |
½”x36”x25’ | HVAC Duct blanket with bonded trim fabric one side, uncoated glass fabric on “HOT” side, service temperature 450°F. |
| Insulation Blanket: Process specification LAC G597 C2B with LAC26-871
#34424 Green Trim Fabric bonded both sides |
56498
(other colors and thicknesses available) |
½”x36”x25’ H | HVAC Duct blanket with bonded trim fabric both sides, service temperature 350°F. |
| Insulation Trim Fabric:
STM26-103 Class 4.5, Type 1, Green #34424 (G26.0941) |
5521D
(other colors available) |
52” nominal width | Trim Fabric used with STM26-703 Insulation blankets. NOT HEAT SEALABLE. |
| Insulation Trim Fabric:
STM26-103 Class 4.5, Type 2, Green #34424(G26.0941) |
5513D
(other colors available) |
52” nominal width HEAT SEALABLE | Trim Fabric for STM26-703 Insulation blankets. |
| Insulation Binding Fabric:
STM26-103 Class 4.5 Type 1, Green #34424 (G26.0941) |
5933D
(other colors available) |
4” width St. Tape 300 FT/RL | Fabric Binding Tape used for edge binding STM26-703 blankets. |
| Insulation Binding Fabric:
STM26-103 Class 4.5 Type 1, Green #34424 (G26.0941) |
5903
(other colors available) |
1” width Bias Tape 234 FT/RL | Fabric Binding Tape used for cut out and slit (detail) binding of STM26- 703 blankets. |
| Glass Cloth Binding Tape:
MIL-Y-1140, Form 5, Type Ecc A, Class C |
2909 | 1-½” width 50 YD/RL | Glass cloth binding used on duct blanket assemblies per LAC G597 |
| Floor Matting:
STM 26-102, Type III with 1/8” foam underlay, color brown, #20140 |
20520
(other colors and thicknesses available) |
1/8”x54”x40YD | Floor matting for use in the Flight Deck area. |
| Headliner:
20JB8-8F/FS33578/9R/PF3 color Biege #33578, perforated with 1/8”foam backing |
20521
(other colors and thicknesses available) |
1/8”x54”x40YD | Headliner material, foam backed and perforated for use in the Flight Deck area. |
| Hook and Loop fastener: | Contact Customer Service | Various widths and colors available, also available in Nomex. | Hook and Loop Fastener, used in fabrication of between frame batting, sidewall and crown blankets. |
| Snap Fasteners:
NASM27980 -1N NASM27980 -6N NASM27980 -7N NASM27980 -8N NASM27980 -27N (replaced - 26N) |
14001 14003 14005 14007 14040 | Per specification NASM27980 (MS27980 Superceeded). Other hardware specifications available | Snap fasteners for the installation of STM26-703 sidewall and crown blankets. |
| Thread | Contact Customer Service | Per customer requirements | Thread for use in fabrication of insulation assemblies. |
| Cover Film, Reinforced:
STM22-102 Type II (G22.5791) |
5350 | 52” x 500 YD/RL Cutting fees apply for shorter roll lengths. | Reinforced film used as backing on STM26-703 overframe blankets, and STM26-702 between frame batts |
| Repair Tape:
OT-102/ STM22-102 |
5350-4 | 4” x 60YD/RL | Repair tape for use on STM26-703 overframe blankets (backside only) and STM26-702 between frame batts. |
| Fabric, Chloroprene coated:
LAC26-871(1) duct fabric, Green #34424 (G26.0901) |
5928
(Other colors and widths available) |
38” wide | Fabric, Chloroprene coated, Used on HVAC ducting and LAC G 597 blankets. |
