LAMAGUARD-30A-TY2-CL2

Component 86 – 1

LAMAGUARD-30A-TY2-CL2

CONSTRUCTION

Lightweight APK film, scrim reinforced, deluster coating

 
FEATURES
Very light weight, easy to fabricate, non-glare deluster coating
APPLICATION
Covering film for thermal and acoustic insulation
Meets FAR 25.856(a), FAR 25.855, and FAR 25.853

 

PROPERTIES  VALUE TEST METHOD*
PRODUCT WEIGHT
0.75 oz./yd2 | 25.5 g/m2 LTM #25A
BURSTING STRENGTH
40 PSI | 277 KN/m2 LTM #29A
PUNCTURE RESISTANCE
10 lb. | 44 N LTM #26
T-PEEL (HEAT SEAL)
3.0 lb./1 in. | 13.2 N/25 mm  LTM #30
THREAD ADHESION
1.5 lb./1.5 in. | 6.6 N/38 mm LTM #3E
ROLL SIZES
52 in. x 350 yd. | 1320 mm x 320 m  
RADIANT PANEL
Pass  
HEAT SEALING
260oF – 300oF | 127oC – 149oC  
SEWING
Recommend six (6) stitches per inch (Two (2) per cenimter)  
SHELF LIFE
Two (2) years from date of manufacture when stored in original carton under conditions of 70 degrees F. (21 degrees C.) and 50% RH.  

 

*Lamart Test Methods can be obtained through Lamart Corporation Customer Service.

Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.

>

Contact us

  • This field is for validation purposes and should be left unchanged.