LT Hardware

Component 86 – 1

LT Hardware

CONSTRUCTION

Scrim reinforced, APK backing, coated with a high performance acrylic PS adhesive and protected with a paper liner

 
FEATURES
Strong, yet light-weight. Excellent adhesion to covering films, as well as to fibrous insulation materials
APPLICATION
Used for making, installing, and repairing aircraft thermal/acoustic insulation blankets
SPECIFICATIONS
Meets FAR 25.856(a), FAR 25.853, FAR 25.855, MMS 01-001 (Type 6)
ADDITIONAL INFORMATION
Use the following Lamart covering films: Lamaguard 10, Lamaguard 12

 

PROPERTIES  VALUE TEST METHOD*
PEEL STRENGTH (48 HR DWELL)
SS: 45 oz. / in. (min.) |
12.5 N / 25.4 mm (min.)
LTM #14
WEIGHT W/O LINER
10lb (min.) | 44N (min.) LTM #10A
COLOR
DULL WHITE  
SHELF LIFE
Two (2) years from date of shipment when stored in original container under conditions of 70 degrees F. (21 degrees C.) and 50% RH.  

 

*Lamart Test Methods can be obtained through Lamart Corporation Customer Service.

Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.

>

Contact us

  • This field is for validation purposes and should be left unchanged.