LT23-MD-TY1

Component 86 – 1

LT23 MD-TY1

CONSTRUCTION

Scrim reinforced, metallized, delustered polyether ether ketone backing, coated with a high performance acrylic PS adhesive and protected with a paper liner

 
BENEFITS
Strong, yet light-weight. Excellent adhesion to covering films, as well as to fibrous insulation materials.
APPLICATION
Used for making, installing, and repairing aircraft thermal/acoustic insulation blankets
SPECIFICATIONS
Meets FAR 25.856(a), FAR 25.853, FAR 25.855
THERMAL
Laminating adhesive good to 120oC

 

PROPERTIES  VALUE TEST METHOD*
PEEL STRENGTH (24 HR DWELL)
SS: >40 oz. / in. |
11.4 N / 25 mm
PSTC 101
BREAKING STRENGTH
10lb (min.) | 44N (min.) Fed Std 191 TM5100
WEIGHT W/O LINER
DULL WHITE  LTM 25A
COLOR
Metallic  
SHELF LIFE
Two (2) years from date of manufacture when stored in original container under conditions of 70 degrees F. (21 degrees C.) and 50% RH.  

 

*Lamart Test Methods can be obtained through Lamart Corporation Customer Service.

Physical and performance values and characteristics shown above are obtained through recommended test procedures. The above values do not represent a guarantee of product performance and are not intended for use in determining engineering specifications. Values represent nominal and average values; individual roll values may vary from average values indicated on the data sheet. User is responsible for determining suitability and fitness for use. User assumes all risk and liability whatsoever in connection therewith. Seller assumes no liability beyond the replacement value of material.

>

Contact us

  • This field is for validation purposes and should be left unchanged.