OT-40N - Boeing Specification: BMS 5-133

Component 86 – 1

OT-40N - Boeing Specification: BMS 5-133

ORCOTAPE® OT-40N is a lightweight double-sided pressure-sensitive reinforced polyester tape with differential tack.  This Product meets Boeing Specification BMS5-133. It is used to adhere aircraft floor coverings such as carpet, padding and galley mats to aircraft flooring. Leaves no residue when removed from aircraft floor surface.  Meets the latest EU REACH, US EPA and Boeing environmental safety requirements.

PROPERTIES  TEST METHOD SPECIFICATION
COLOR
  Side 1: Dark Gray
Side 2: Black
WEIGHT
Fed Std 191, Method 5041
5.0 oz/sq.yd, max
4.5 oz/sq.yd, typical
PEEL STRENGTH
BMS5-133, 180º Peel - Aluminum
Side 1: Dark Gray Side 2: Black
2.0 lbs/inch, min
8.8 N/25 mm, min 5.0 lbs/inch, min
21.8 N/25 mm, min
LAP SHEAR STRENGTH
BMS5-133
Side 2: Black
30 lbs/inch, min
132 N/25 mm, min
TENSILE STRENGTH
BMS5-133
20 lbs/inch, min
88 N/25 mm, min
FLAMMABILITY,
TAPE ONLY
BSS7230, Method F2;
FAR Part 25 App. F Part I: Vertical Burn
Test (12 secs)
Pass

SPECIFICATIONS

FAR 25.853, FAR 25.855;
BMS5-133 Type IV, Class 1;
BAMS 535-002
 
ENVIRONMENTAL
REGULATIONS COMPLIANCE
EU REACH, US EPA; Boeing BDM-1712, RoHS  
PACKAGING
Standard roll length
Standard width
60 yards (55 meters)
2 and 3 inches (5.1 and 7.6 cm)
Custom widths available on request

Side 1, the dark gray side, is designed to adhere to the floor. Side 2, the black side (with release liner), is designed to adhere to the floor covering (carpet) backing.

Note: To the best of our knowledge, information in the document is accurate. However, ORCON Aerospace does not assume liability for the accuracy or completeness of the information provided. ORCOTAPE is a registered trademark of ORCON Aerospace. This revision replaces all previous revisions. Revised 05/2013.

>

Contact us

  • This field is for validation purposes and should be left unchanged.