Space Insulation Films
ORCON reinforced Kapton® and Mylar® space films have been specially developed to meet the space industry's need for strong, but lightweight, films for MLI (multilayer insulation) blankets and other spacecraft applications.
Reinforced films can help:
- Rip & Tear Prevention
- Reduce Cost of Blanket Repairs
- Reduce Schedule Delays
ORCON uses its proprietary Bonded Orient. Continuous Strand (BOGS) technology to apply Nomex® reinforcing yarns to one face of the film. The advantage of the BOCS process is its unique method of securing the yarn to the film. Instead of coating the entire film surface with adhesive, the BOCS method applies adhesive only to the yarns in one direction. This minimizes the amount of adhesive, making ORCON reinforced films much lighter in weight than competing reinforced films, while easily meeting strict outgassing requirements. Also. the open pattern of ORCON's reinforcing permits direct access to the film surface for static grounding.
Using ORCON reinforced space films, MU (multilayer insulation) blanket designers can replace thick. heavy external film layers with thinner reinforced films that are much stronger, yet weigh less. than the thick film. The cost benefits from fewer blanket repairs and lighter weight can be significant. especially on large communications satellites.
ORCON space films come in a variety of types to meet different spacecraft applications.
Our standard product configurations are list. below. Please contact us if there are other configurations you are looking for.
Space Insulation Films
|AN-108-S||Lamination of 2 layers reinforced 0.5-mil Tedlar®, aluminized inside for static dissipation. NASA-KSC Group 1 protective cover film.|
|AN-90D||0.5-MIL (12.7 micron) Mylar®, aluminized one side, reinforced on aluminized side.|
|AN-90PD||Same as AN-90D, with perforations.|
|KN-90D||1-mil (25.4 micron) Black 100XC Kapton® (10E7 ohm/sq.). Reinforced one side. Not metalized|
|KN-90GD||Same as KN-90D, with germanium applied to non-reinforced side of film.|
|KN-92PD||0.5-mil (12.7 micron) Kapton®, aluminized one side, with perforations. Reinforced on aluminized side.|
|KN-94D||1.6-mil (40.6 micron) Black 160XC Kapton® (360 ohm/sq.). Reinforced one side. Not metalized.|
|KN-94PD||Same as KN-94D, with perforations.|
|KN-99D||1-mil (25.4 micron) Black 100XC Kapton® (10E7 ohm/sq.). Aluminized one side. Reinforced on aluminized side.|
Notes: All reinforcing is 200 denier Nomex® yarn in 4x4 yarns per inch pattern. Standard Perforations provide 1%-2% open area for ventilation
We Can Help Every Step Of The Way!
Being a truly vertically integrated supplier of aircraft insulation materials & systems, we are always
ready to help you with your aircraft insulation requirements.